RHEL 10 must not forward Internet Protocol version 6 (IPv6) source-routed packets.

STIG ID: RHEL-10-800240  |  SRG: SRG-OS-000420-GPOS-00186 |  Severity: medium (CAT II)  |  CCI: CCI-002385,CCI-001111 |  Vulnerability Id: V-281356

Vulnerability Discussion

Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when forwarding is enabled and the system is functioning as a router.

Satisfies: SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00087

Check

Note: If IPv6 is disabled on the system, this requirement is not applicable.

Verify RHEL 10 does not accept IPv6 source-routed packets.

Check the value of the "net.ipv6.conf.all.accept_source_route" variable with the following command:

$ sudo sysctl net.ipv6.conf.all.accept_source_route
net.ipv6.conf.all.accept_source_route = 0

If "net.ipv6.conf.all.accept_source_route" is not set to "0" or is missing, this is a finding.

Fix

Configure RHEL 10 to not accept IPv6 source-routed packets.

Create a configuration file if it does not already exist:

$ sudo vi /etc/sysctl.d/ipv6_accept_source_route.conf

Add the following line to the file:

net.ipv6.conf.all.accept_source_route = 0

Reload settings from all system configuration files with the following command:

$ sudo sysctl --system